Low-Noise Design
Low-noise design allows clear, low-light image capture: Highly sensitive CCD chip and Nikon's exclusive signal-to-noise digital circuit technology design now exhibits a sensitivity more than twice that of previous models, making low light fluorescence image documentation possible with outstanding results. The new CCD's enhanced quantum efficiency allows a greater spectral sensitivity, especially in the red and near infrared part of the color spectrum. Gain can be set in three levels and long exposure times are also available. High Speed Data Transfer
High speed data transfer to accommodate work efficiency and precision: Live image displays at high speed data transfers of 12 frames per second for precise viewing and focusing surpasses previous imaging standards. High-Performance Intuitive Software
Intuitive ACT-1 software operational capabilities simplify imaging enhancements and corrections with the click of the mouse. Live field of view frames available to capture the precise on-screen image at up to 14 different file modes & image size. Direct PC-to-Camera Connection
The DXM1200F camera head connects to the PC via a single cable to the PCI interface board installed into the computer without additional wiring or power source. Wide Selection of Magnifications
Standard C-mount attachment of the DXM1200F camera allows a wide selection of magnifications: Nikon has developed a new wide-field relay lens exclusively for the DXM1200F. Nikon recommends the C Mount 0.7X DXM Relay Lens, designed to provide less shading and more flatness in the images [optional].
Image size/Resolution level
3,840 (H) x 3,072 (V) pixels (max. in Fine mode); 1,280 (H) x 1,024 (V) (max. in Quick mode) CCD
2/3-in. high-density, interline transfer, progressive scan CCD, with RGB Bayer pattern color matrix. Total number of pixels: 1.5 million (effective 1.45 million). Square pixel size 6.45 micron x 6.45 micron. Read out speed 20.25 MHZ / 12 FPS, read noise 8 e-rms, full well charge 18,000 electrons, final output digitization 8-bit. Lens Mount
C-Mount Sensitivity Setting
3 levels selectable: Normal, High and Max. Exposure Control
Manual Auto White Balance
Can be preset by selecting a point or rectangle. Exposure Time
1/12,000 to 170 sec. Shooting Mode
Fine (10 types): 3,840 x 3,072 pixels to 640 x 480 pixels. Quick (4 types): 1,280 x 1,024 pixels to 640 x 480 pixels. Live Image Size
640 x 512 pixels (12 frames/sec. max.) Data Saving Format
BMP, JPEG (3 types compression), or TIFF (uncompressed) Interface
Dedicated interface board (PCI bus) Dimensions
78 (W) x 136 (H) x 69 (D) mm (3.1 x 5.4 x 2.7 in.) excluding protrusions; Interface cable: approx. 2m (6.6ft.) Weight (without battery)
Approx. 800g (28.3 oz.) excluding lens Operating Temperature/Humidity
Temperature: 0 to + 40 °C, Humidity: 10 to 80% (without condensation) Power Supply
Supplied from PCI bus (via dedicated PCI board) Recommended Operating System
Windows 98 / NT 4.0 / 2000 / ME / XP (English & Japanese versions); CPU: Pentium III 1GHz or faster: Video RAM: 16MB or greater memory space required; RAM: 256MB or greater memory space required; Hard Disk: 100MB or greater memory space required; Display monitor: 1,024 dots x 768 lines or greater, 16.7 million or more colors must be reproduced; Motherboard: PCI expansion slot required; Interface: Only dedicated interface board can be used; Note: Some PCs may not work in this environment. If this happens, please consult Nikon or its local Nikon representatives. Download Spec Sheet
Click Here
|
)
